USD
EUR
GBP
CAD
AUD
Your position: Home / New arrival
Free Shipping
Waterslide Decal for Transformation SS86 Optimus Prime
Decal for Studio Series 86 Optimus Prime
It includes a total of 5 stickers, with numbers 17, 24, 55, and 56 available in multiple designs.
Operation Steps:
1. Cut the decal and soak it in water for about 2 seconds. When the backing paper is completely soaked, the pattern will come off.
2. Use tweezers to pick up the pattern and place it in the corresponding position according to the instructions.
3. Press the decal with a cotton swab or tissue to remove excess water.
4. After pasting, let the toy air dry for 6-8 hours. (Do not play with the toy before it is completely dry to avoid the decal shifting. The decal will become very firm once completely dry!)
Precautions for water decal use:
1. When using water decals, immerse them in water for about 1-3 seconds, then take them out. Wait until the decal and backing paper separate before applying. Prolonged soaking may cause the decal to separate from the backing paper, making it difficult to pick up. If soaked for too long, the adhesive layer of the decal may come off, causing the decal to curl the next day.
2. After applying the water decal, it is best to press it with a paper towel to make it more secure. If there are uneven surfaces, especially small areas, be sure to use this method.
3. Due to temperature changes and significant indoor/outdoor temperature differences, after receiving the package, let the decals adapt to the indoor temperature before using. Avoid thermal expansion and contraction issues that may cause the decal adhesive layer to crack.
4. If the decal is not used up, please store it back in the pocket, avoiding light and sealing.
Decal for Studio Series 86 Optimus Prime
It includes a total of 5 stickers, with numbers 17, 24, 55, and 56 available in multiple designs.
Operation Steps:
1. Cut the decal and soak it in water for about 2 seconds. When the backing paper is completely soaked, the pattern will come off.
2. Use tweezers to pick up the pattern and place it in the corresponding position according to the instructions.
3. Press the decal with a cotton swab or tissue to remove excess water.
4. After pasting, let the toy air dry for 6-8 hours. (Do not play with the toy before it is completely dry to avoid the decal shifting. The decal will become very firm once completely dry!)
Precautions for water decal use:
1. When using water decals, immerse them in water for about 1-3 seconds, then take them out. Wait until the decal and backing paper separate before applying. Prolonged soaking may cause the decal to separate from the backing paper, making it difficult to pick up. If soaked for too long, the adhesive layer of the decal may come off, causing the decal to curl the next day.
2. After applying the water decal, it is best to press it with a paper towel to make it more secure. If there are uneven surfaces, especially small areas, be sure to use this method.
3. Due to temperature changes and significant indoor/outdoor temperature differences, after receiving the package, let the decals adapt to the indoor temperature before using. Avoid thermal expansion and contraction issues that may cause the decal adhesive layer to crack.
4. If the decal is not used up, please store it back in the pocket, avoiding light and sealing.
